Hydraulic Auto End Shrink Machine

液压缩管机Hydraulic Auto End Shrink Machine

一、设备的用途 / Usage：

该设备主要用于：圆管两端自动缩口加工。

This machine is mainly used for automatic end shrinking of steel pipes

二 、适用工件范围 / Applicable Range for Workpieces

• 管长度 Pipe length：200-1000 mm
• 圆管直径 Pipe diameter: φ38mm
• 圆管长度误差 Length tolerance: ＜1mm(±0.5 mm)

三、设备特点 / Features：

1. 自动上料、卸料：减少了操作人员的劳动强度。

Automatic loading and unloading - reduces labor intensity of operators.

2. 两端同时缩口：速度快、效率高。
Both ends shrink simultaneously - high speed and high efficiency.

四、主要配置 / Main Components

五、主要技术参数 / Parameters

6. 设备动作流程 / Operation Sequence

1. 原材料钢管自动上料至工位。
   Raw pipe is automatically loaded to the working position.
2. 夹紧机构固定钢管，两端缩口模具同时动作，完成缩口加工。
   Clamping mechanism secures the pipe; both end shrinking dies act simultaneously to complete the shrinking process.
3. 加工完成后自动卸料，成品落入料框。
   After completion, the pipe is automatically unloaded into a container.
4. 循环运行，连续生产。
   Cycle repeats for continuous production.

七、设备外观参考图片/ Equipment appearance reference drawing