Renqiu Jinshi Welding Machine Co.,Ltd
Product Center
Contact Us
North 300m, Beixin Cottage, Xinzhongyi Town,Renqiu City,Hebei Province,China.
Sales hotline: +86 15028693258
Technical Support：+86 15369778811 +86 15831733766 +86 15833368033
Laser Welding Machine Welding Robot Station for H-Frame Scaffold Production
keyword：
Scaffolding Welding Machine
Laser Welding Machine Welding Robot Station for H-Frame Scaffold Production
Description of Welding Parts:
-
Diameter of Welding Wire: 1.0 mm (adjustable according to different workpieces)
-
Weld Types: Flat weld, fillet weld, half-round weld
-
Protective Gas: CO2 gas
-
Working Mode: Manual loading and unloading, robot automatic welding
-
Thickness of Surfacing Layer: Dependent on specific technical requirements
Solution Overview:
(Design can be customized based on customer requirements)
The welding robot system consists of the welding robot, welding power supply, robot-specific welding gun, electrical control system, button station, and safety protection fence (optional). After the workpiece is manually placed in the tooling, the robot automatically begins the welding process.
Process Flow:
-
Preparation Process: Welding parts should be prepared according to the drawing requirements.
-
Install the Workpiece: The operator places the workpiece onto the workbench in Station 1.
-
Workpiece Limiting: The operator pushes the workpiece to the workbench, positioning it close to the limit block.
-
Robot Welding: The operator returns to a safe position, presses the start button, and the robot automatically performs welding from the set position.
-
Workpiece Unloading: After welding, the robot moves to Station 2 for further welding. The operator then returns to Station 1 to unload the welded workpiece.
-
Cycle Continuation: The process repeats in a continuous cycle.
Configuration (as shown in the photo above):
-
Welding Robots: 2 sets
-
Overturn Operation Platforms: 2 sets
-
Tack Welding Jigs: 2 sets
-
Digital Welders: 2 sets
Working Steps:
-
Place the workpiece onto the tack welding jig and fix it.
-
Start-up Position One: The welding robot follows the preset path to perform welding on the front side. Once completed, the overturn platform automatically rotates to the backside. The robot then welds the backside and returns to its original position once welding is finished.
-
-
Start-up Position Two: The welding robot operates at Position Two. During this time, the operator can remove the welded workpiece and place a new one for welding.
-
Positions One and Two alternate in a continuous cycle, significantly improving production efficiency.
Parameters
| Model | SF6-C2080 |
| Drive Capacity | 7.8KW |
| Position Feedback | Absolute Value Encoder |
| Input Power | Three phase four line AC380V + 10% |
| Maximum Load | 6kg |
| Repeatable Positioning Accuracy | ±0.08mm |
| Action Range | R=2000mm |
| Configured Welding Machine | CM350 |
| Maximum Input power of welding machine | 8.7KW |
| Weight | 300kg |
| Range of Motion of Each Axis | J1: Free motion between -170°~+170° J2: Free motion between -170°~+90° J3: Free motion between -150°~+85° J4: Free motion between -135°~+135° J5: Free motion between -135°~+90° J6: Free motion between -360°~+360° |
| Maximum Uniaxial Speed | J1:1.83rad/s{105°/s} J2:1.83rad/s{105°/s} J3: 1.83rad/s{105°/s} J4: 3.66rad/s{210°/s} J5: 3.66rad/s{210°/s} J6: 5.41rad/s{310°/s} |
| Welding Speed Per Minute | Vmin<=450mm/min Vmax>=5000mm/min |
| Trajectory Repeatability | The robot operates 5000 times along the set trajectory under the no-load speed of 300mm/min, and the deviation between the trajectories is not more than 0.1mm. |
FAQ
Disc button multi-functional repair machine hydraulic system device
Disc repair machine has five functions, specifically: scaffold disc straightening, expanding, repairing disc, repairing top support tilt tie rod rivet machine, the machine is divided into two, there are manual switch and foot switch two.
Cross-bar straightener multi-functional repair machine repair scaffold deformation equipment
Multi-functional disc repair machine is suitable for making wheel buckle buckle scaffolding, quick dismantling, quick removal of steel pipe industry, the machine is mainly hydraulic configuration, the machine is based on 4 kW pure copper motor, the machine working pressure is large, the machine can be operated by two people. Simple and easy. The main functions are: straightening and expanding circle repair disc flat top support, punching tie rod rivets five functional integrated machine.
Related Products
Advisory Message
To: Renqiu Jinshi Welding Machine Co.,Ltd
Hotline:
North District, Renqiu Economic and Technological Development Zone，Renqiu City, Hebei Province, China
Sales hotline: +86 15028693258
Technical Support：+86 15369778811 +86 15831733766 +86 15833368033
Our Products
Renqiu Jinshi Welding Machine Co.,Ltd