Communicate with Supplier? Supplier
Evelyn Ms. Evelyn
What can I do for you?
Contact Supplier


Industry Information

Home > Industry Information > How to choose scaffolding (2)

How to choose scaffolding (2)


How to choose scaffolding

5. The safety net adopts the dense mesh safety net, the mesh should meet 2000 meshes/100cm2, and the penetration test is not to be penetrated. The weight of the single sheet net of 1. 6×1. 8m is more than 3kg, and the color should meet the environmental effect requirements. , choose green. Requires flame-retardant, the use of safety net must have a product manufacturing license and quality certification, as well as permit issued by the construction safety supervision and management department.

6. Walls are made of steel pipes, and their materials should meet the requirements of Q235A steel in the current national standard "carbon steel structure" (GB/T700).

7, cantilever scaffolding horizontal cantilever pole adopts 16a channel steel, total length 3m, in which the length of the anchorage building is 1. 5m, the cantilever length is 1. 4m. The steel wire rope uses a 6×19 wire rope with a diameter of 18.5mm, and the embedded anchor ring uses a round steel with a diameter of 16mm. The bottom layer of the hanging scaffold is closed with an old wooden formwork.

8, cantilever scaffolding angle steel using 16a channel steel length of 2. 1m. The diagonal cable drawstrings are 6 x 19 models with a diameter of 14mm. Cantilever scaffolding angle angle steel material requirements with overhanging scaffolding. For the welding of steel and building embedded parts, the welding seam must be full and even. The width and thickness of the weld must meet the design requirements. The welding rod is selected from the group consisting of T506 and above. The welding rod must be manufactured before it can be used. The electrode must be properly stored and used. Beware of moisture. Once the electrode is broken, it must not be used again. The embedded anchor ring on the upper part of the diagonal cable was a round steel with a diameter of 16mm.

So, do you know how to choose scaffolding or do you want to make scaffolding yourself ?

Renqiu Jinshi Welding Machine Co.,Ltd is a high-tech enterprise, specialized in the research and development, design, production and sales of scaffolding automatic welding equipment. Our company can customize the following special welding and corollary equipment for each type of scaffold according to customer requirements – Vertical Pole Automatic Welding Machine, Cuplock Scaffolding Welding Machine , Cross Bar Automatic Welding Machine, Jack Base Welding Machine, Vertical Starting Pipe Welding Machine, Steel Prop Special Welding Machine, Hydraulic Punching Machine, Automatic Cutting Machine, etc.

JINSHI can satisfy all your requirements for scaffolding.

scaffold welding machine

Cuplock Scaffold Welder

Send Inquiry


Ms. Evelyn


Send Inquiry



Mobile Phone:+8619933263892Contact me with Whatsapp


Address:North 300m, Beixin Cottage, Xinzhongyi Town,Renqiu City, Cangzhou, Hebei

Mobile Site